Recent content by DH.120

Can’t try it at the moment but if I remember right all you have to do is lock the car again with the key and the alarm will not get set.

Used the brackets that came with the light bar and drilled the grill and bolted to that. Know that sounds a little strange, but it’s been 4 years and it’s not budged (or fallen out ) see the photo in the previous post which has the Red lines show where I cut the grill for the opening and the...

Funny isn’t it that sometimes it’s the easy things we never even try!

Love it Karl, was a few £ (they seem to cost even more now then when I got mine) but great to have the CB easily used but also out of the way. The led interior lights are great also, much better than the 1 candle power ones installed by mr t. Small “locker” not that useful but do use it when...

You can remove the unit with the interior light and sensors without having any negative effect, this will remove the interior alarm sensor. I’ve done this so that I could install a roof center console and have had no issues for over 2 years. Can’t recall the exact arrangement, but if I remember...

Summer is never long enough with a 120 How true!!

Not replaced, but have had it out and ‘fixed’ it by creating a new bushing. Hardest part of the job was removal of the wiper blade holders from the splines, but once they were off it’s a simple task to remove the plastic covers and once removed there’s plenty of room to work and remove the...

Think it’s weird to have a low beam warning light but can see that on cars with day light running and dumb drivers that it is probably necessary. The amount of people I see when it’s dark / raining / foggy who don’t have their lights on these days is just unbelievable- but every one of then has...

I believe it manufacture date- year month

Quick oil & filter change and fuel filter changed too.

Hmmm, Looks like the signage for ULEZ is not legal, and therefore you might not have to pay!

@RichC4 - Gale my recommendation panned out.

Really you should go via a relay, and also have the power to the relay switched also so that high beam can be on without the light bar. If not then you will most probably fail your next mot as your high beam pattern will be incorrect.

These days (at my age) everything takes a long while !!!!

Hmm that will be interesting - no taking the bulbs out of the upper lights now as they are LED units! Still if that's the case then I guess some tape over the lower bumper ones at MOT time :) Then there is only 1 set :expressionless: