Search results

hi, looks like my batteries are giving up the ghost, any recommendations for replacement ? what specification for the batteries ? not near the car at present so can not check it, cheers Roy.

no, I get that there are difference sizes for either end. my point was there 2 different types of boot clip, one style has to be pinch tight with a tool, the other is simply pulled tight and folded over. I wanted to know if there is a specific placing of these different clips, ie. what ones...

hi, just going to do the gaiters on the front shafts as one has split, so got through the roughtrax cv gaiter kit my question is as there are two types of boot clip which it to be used on the inside/outside of the drive shaft ? this is the first set I am doing so it may be dumb question...

so got some wheel studs through, the picture shows the length difference rear to front the gold one is from milners and is listed as front or rear the grey one is from roughtrax and is listed as front, could not see a rear the splined area on the two are different lengths which surprises...

hi , any one interested in my old man emu springs that are up for sale, OME 881 Spring http://www.devon4x4.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=510&category_id=145&option=com_virtuemart&Itemid=14 OME 890 Spring...

yes that's a good idea, that would give me a definitive answer. I did not think about individual studs rather than full sets. cheers roy

hi, I do not know how much length is hidden behind the discs and hubs. I can not accurately measure the studs with out removing them and that is not possible at the moment. also I require longer studs all round , only a few mm longer on the rear bit they do need to be longer .

hi all, is someone able to tell me the length of the long and short wheel studs found on a Colorado ? I have the same issue as has been highlighted before of shorter front suds and longer rear studs. I have spacers I wish to fit and can see how much longer they will need to be in order to fit...

are you still needing a cad drawing done ? if so pm me I can help. cheers roy

my 95 has the same style as your second picture, are they not universal ?

do not know about that one , but I have full front and rear bumpers available. if you are after one. cheers roy

I work in this industry, and i would go for a paint job over vinyl. paint is far more resilient than vinyl, in many ways. to do a good wrap you need to remove the same amount of parts from the car as a paint job, so may as well paint it.

ignore that's last request just saw the stats on your listing, doh !

hi , what diameter are the tyres ? what diff ratios have you fitted ? cool truck cheers roy

hi, I have that roof rack, bought it years ago, still in good nick and I use it for moving tons of stuff. it is steel and has a bit of weight, which you will notice when fitted but soon get used to how the car feels with it on. I like the look of my truck more with this rack on than without...

I to like the tjm seat covers, can anyone tell me where I can get another set online ? had a set from years ago and want to replace them. I have looked for a online retailer but it always seems to be Australian and do not send to the UK. any help appreciated, cheers roy any suggestions ?

well funny

anyone running kuhmo kl71 tyres ? if so are they any good ? I do like the look of them. cheers roy

Good find,

never seen this come up before, full suspension and arch kit from artic trucks http://www.ebay.co.uk/itm/251456469868?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 cheers roy

hi what size of speakers are fitted to our trucks ? anyone upgraded their speakers and got some suggestions for replacements ? cheers roy

HI Shayne, can you explain whats involved with the mods you have done , couple of washers behind the wastegate actuator bracket EGR blanked and how do you adjust the fuel pump these are all things i want to do but do not have experience with diesel engine tuning, cheers roy

hi Shayne, no problem. it does seem to be a hard part to find on its own. if your not selling it then that's cool, the hunt will continue. cheers roy

hi Shayne, nice to see the write up on the intercooler install. see the inlet pipe in your first picture, would you be up for selling it ? I am looking for that part for a project I have in mind. cheers roy

I thought this video was quite impressive towing an artic with trailer on dirt, http://www.youtube.com/watch?v=d0ZlcvjJQ5g

hi, I got mine on ebay , keep looking regularly they do come up. cheers roy

Andy I sent you a pm

here is my truck from start to present to this

vacuum switch ? what is this for ? is it needed ? cheers roy

here it is on the right

no it is on the servo its self not the fluid reservoir .

I have my Colorado in the garage getting a replacement servo fitted, it seems the old one has a wire going into it , I wondered what this is for ??? as the replacement servo does not have the same place on it for the wire. any help would be appreciated. cheers roy

I agree it would be cheaper, just curious as to how much new engines are.

hi does anyone know the cost of new d4d engine from Toyota is for a Colorado series vehicle ? just wondering. also what would be needed to go with this engine to convert form a 1kz-te set up ? cheers roy

anyone help out with this

does anyone have one of these inlet pipes for sale ? for custom intercooler project. cheers roy