Okay thank you, will get it wired in in the next week or so.
Thanks for the reply.
So if I'm adding a solar panel (which I am) it's best to leave the ignition wire off?
Another dumb question, I am right in...
Right, after owning the Intervolt DCC Pro for almost a year now I have decided to fit it :laughing:
One question, the terminal marked 'Ign'. I...
I think thelal might mean Maltec.
Paint should be finished the end of this week.
A guy called Frank, he lives in Germany.
Okay thanks that makes sense, just :)
I will wire in both sets of new lights and take a reading then. They are LED units so not sure if that will...
When turning on the ignition there is a 2v feed down the brake light circuit.
When selecting D, 3, 2, or 1 there is a 10v feed down...
The 2v reading is taken with no rear lights fitted.
I discovered this weird anomaly when wiring up a new cluster of rear LED lights. On the left...
Thanks Grimbo, I'll have a look at that and see if that's where the problem lies.
The brake lights work with the ignition switched off but this 2v...
I did have but these have been removed.
The 2v reading is taken from the loom which has been trimmed back to just behind the passenger seat.
I am currently in the process of wiring up the new lights on the camper build and have noticed an odd occurrence.
When turning on the ignition...
I always loosen the panhard rod and control arm bush bolts, then tighten them back up once the weight is back on the wheels.
If everyone stopped eating dead animals the world would be a cleaner place.
Another thread I have missed.
Nick, after 10 years of ownership I have just cut my 80 behind the front seats. She was due a makeover and like...
Yes pop top.
[ATTACH] No, not extended the chassis. The cabin is 2.3 meters long.
My conversion is getting there.[ATTACH]
Hurrah, yes all is good now.
Is it just me or is there a problem with toyodiy.com today?
I think you might be right Frank, is doesn't appear to be anything too crucial as it is simply an aluminium pipe. But, being a complete chump I...
You are right Chris, knob is an understatement. I was tired and should have stopped working.
Looks like its going to be a £400 mistake
It's worse than that. I tapped the end of the output shaft to knock it out of the bearing and have bent the end of the shaft, it's a small tube...
I got my mate Percy Vearance to give me a hand, also used a large jemmy bar and it's off.
Just trying to tackle this job but the rear case just will not come loose. All 9 bolts out, speedo cable out, electrical plugs unplugged but it's...
My current setup is to hard.
My 80 will be lighter once finished so the suspension needs changing, I like the idea of being able to adjust the...
As part of my rebuild project this year I am looking at replacing the EFS springs and shocks I have on my 80.
Has anyone here fitted OME's BP-51...
I have gone with option 2. If you go with option 1 you could end up with 2 flat batteries.
Gary has done a great guide here which I followed.
Suspense over..... sold :)
And replied to.
Still for sale.
Still for sale.... Animal are you still trying to work out how to use a phone?
Very impressive build.... but one question. Weren't the tyres a b'stard to fit?
North West, 39 miles from your front door.
Thanks both. The ones I'm considering are these. Are they the right nuts for these wheels?
I'm thinking of replacing my 15" DuneMax Proline wheels with the standard 16" alloys so I will need to replace the wheel nuts.
Am I right in...
I managed to get the whole sun roof out today. I then cut it up and remounted the bit the roof lining clips to, even the sliding cover is back...
Once mine is out I will be spot welding a section cut from the rear roof section of the body.... the whole rear body is being removed.
A great idea indeed Nick. As I will soon be removing the rear doors I now have no need for it.
Just sent you a PM.
Do you want me to find out what the cost is over to Ireland first as it may be prohibitave?
One off roof ladder, fits to the top of the drivers side rear door. Needs 6 holes drilling in door to secure.
£110 collected from Shropshire,...
Genuine Maggiolina Safari 1.3 x 2.1 complete with extendable ladder.
Great condition, mattress has always been covered from new, two pillows also...
Oooer, sounds interesting can I give you a bell?
I am about to start my conversion which will require some major surgery (slight understatement there) to my 80. One of the first jobs will be the...
September this year in Morocco.
That was a two year old question, moved on a bit since then.
It was a copy of a Maltec one.
Thanks folks.... a few things to consider there.
Thanks for the tips Stu.
Going to be doing a lot of fabrication of metal work over the coming months.
Anyone here got a Plasma cutter? How easy are they to use? Can...
That’s the stuff.... thanks chaps.
Separate names with a comma.