Search results

hi all, Where can I find a replacement electrical plug or part number for my fuel pump SCV? The black and yellow wire is loose and is putting the vehicle into limp mode. TIA

hello all, Trying to get a denso timing valve part number 09630-0580 for my Amazon fuel pump. Does anyone have a source for where I may buy one? Part number isn't recognised on amayama. Cheers

Definitely an issue with that harness. Gave them a wiggle at idle and engine starts running a bit rough. Will have to investigate further and put in some decent crimps or solder the wires.

Hello, I'm experiencing similar symptoms with my cruiser (2002 1hdt-fte). Had a look last night and seen someone has actually been in there before and replaced the spill control valve from another vehicle. Or possibly another year? Does anyone have a part number for the valve or knowledge of an...

yes, I did think that might have been the post. I had read his a few others with similar symptoms. Even though it's not right, I was quite happy to see the crimp wires. At least it gives me a starting place and the possible cause.

Here's the offending article

Hi StarCruiser, The link just takes me the top of the 100 series forum. I've had a look at my injection pump to try and find anything obvious. It looks like someone has been in there previously and fitted a spill valve from another vehicle and the wires inline crimped. The wires on this one...

Hi Dave, Did you ever find the cause/fix for this? I've recently developed the same fault. Engine light comes on and engine loses power. Also getting the 1220 code for the TCV. Cheers, Lee

Hi Nicolas Which wire on the plug was broken and was it broken in the plug or further down? Cheers

It's an auto; able to select gears but no drive

My friends 120 lc3 is having gear box troubles. He just did a engine rebuild but now it only goes in reverse. Any ideas? Or is he looking at a gear box rebuild? Cheers

Hi all Where in the uk can I get this gasket? Preferably from a UK website. Part number 17115-17010. I've looked in amayama. Just looking to see if there are any other options. Cheers

Has anyone fitted a Dension Gateway device to a 100 series (2002-2006) with the factory satnav? Looking at the Dension Gateway Lite BT in particular. This seems to be the only pitfall of owning a late model 100 series with the factory satnav and cassette player? A minor issue to some but still...

Go for it! The set I bought also said 01-05

3" off the shelf kit was actually referring to the OME kit. Seen they had a one on Amazon but they're out of stock at the moment.

Looking for a 3" suspension lift for an 80 series. Anyone have a kit laying around that they haven't fitted or have removed?

http://www.ebay.co.uk/itm/OEM-Standard-Smoked-Wind-Deflectors-for-TOYOTA-Landcruiser-80-Series-FJ80-01-05-/252398454583?hash=item3ac41ec737:g:OVYAAOSw71BXQUHk These are what I have fitted to mine. Very good quality imo. The 3m tape is very strong. Didn't worry about fitting the clips provided.

I bought the same set. Didn't bother with the clips just used the tape. Still on there strong for the past year and a half now

hi guys, looking for another 80 series. seen a couple on ebay; just wondering if members have seen/viewed/know of them? was looking at the black 97 until i saw the comments on the tread below. hoping someone on here might be able to help. thanks in advance Also, if any members on here might be...

sounds good. And at £110, cheaper than the Milner stuff. wonder if west coast also do a roll bar kit?

The ironman set - what's included in the kit?

Having a look at superpro KIT0058K on ebay now http://www.ebay.co.uk/itm/Toyota-LandCruiser-80-Series-Amazon-Suspension-Bush-Kit-from-Superpro-KIT0058K-/221010189230?hash=item33753bdbae:m:m1QtK53Kz-Xh2zHyOlkML0A Are there any other brands anyone would recommend? Or stick with either oem or...

how do you guys rate the Milner suspension bushes? Looking to replace the lot. First impressions, affordable. But don't won't to be wasting my time and money if the quality isn't there.

Would be interested in a 100mm set. What other aftermarket pieces can your contact supply?

Be wary of the description 'Work light'. they market them as work lights because they don't give you the effective distance for offroad use.

This happened to me a few months ago right after I replaced all the window rubbers. Drivers window got stuck down. Took the drivers window switches out and gave it a strip down and clean. Put it back in and now works a charm.

How do you find the ones from rough trax?

Hi, does anyone have the Oem part numbers for the ball joints. Looking to buy a set from amayama. quick question relating to this; is it the lower or upper ball joints that are prone to failure? My missus prado has an ironman 2" suspension lift and a Milner 1 1/4" body lift with BFG 305s. After...

Here she is!

Finally got the 4" lift fitted. Have a set of cooper stt 315s on a 16x8 +0 offset alloys. But wanting to fit a set of wheel spacers. Any recommendations? I'm thinking 40mm? Seen a set on eBay brand called black raptor

Are these still available?

96, and it was the plate not the actually chassis mount.

For anyone else experiencing loud clunking noises from the rear door when driving over bumps. In some cases, like mine, it wasn't the door hinges. I replaced both top and bottom but the noise was still there. Finally found what it was. It was the rear body mount. It had rotted away and it was...

ive tried loosening and tightening the bolts but having looked on amayama, both hinges for £56.84 it's a no brainer.

ok. Think I've got it. Top and bottom are the same part number 68801-60030

The part numbers I'm seeing is 68801 for the top and 68803A for the bottom hinge. I've tried them both on amayama but getting nothing?

Hi guysMy missus' prado is making the infamous *thump* noise from the back door. Have confirmed its a worn hinge pin, so wanting to replace them.Does anyone have a part number for the top and bottom hinges?Thanks

http://www.justanswer.com/toyota/363vd-need-colour-codes-80-series-landcruiser-radio-wiring.html

It's what was in when I bought it. Bosch 521 & 522. Which looked like they've been in there for a few years; starting to leak a little. It's been a cold winter here which more than likely contributed to it. So thought I'd splash out and buy new ones. At the moment I don't have any additional...

Batteries I took out were 12v 85Ah 320A batteries I put in are 12v 70Ah 630A CCA is doubled. Am I still ok??

So, both batteries flat and a bit knackered so replaced them. But being a bit limited on battery choices here I've had to buy a set of batteries that a little bit smaller in size. Is a 12v battery a 12v battery, regardless of its size? I bought a set of varta batteries. I had a look online and...

nice one