Search results

After we have installed a large camper box on our 75 series I would love to reduce Body roll. We have new springs, shocks and airbags on the rear. I would love to install a rear sway bar. I can see it is possible to get a kit for the 76/78 series. Maybe this can me modified for the 75 series...

So this is interesting. Short backstory...I was an idiot and almost melted the dipstick when it touched the battery terminal. On partsouq.com I ordered a new dipstick by using my VIN number for reference as I always do... Now here is the interesting part.. the new dipstick is a lot longer. Like...

I have been researching were to install an additional oil temperature sensor. The best solution seems to be to install a sandwich adapter under the oil filter. like this: SGAP5-2415 Toyota Oil Filter Sandwich Plate - [Leaving Land Cruiser Club] but those are expensive. Especially from Australia...

I have a catch can installed....but should I uninstall? If the catch can a good idea on the 1HZ? Does it create unnecessary pressure in the engine?

Thanks. always good with some inspiration.

Hi. I am designing some toolboxes to mount under the tray in front of the rear wheel. Something like the attached picture... Does anyone here have something like this and can help with a few questions. 1. What aluminium alloy did you/the builder use? 2. What thickness material did you use? I...

I ended up bending the clip as this was the only solution TerrainTamer would approve of. Looks like shit and is most definitely be a temporary solution. But also the only solution I could manage as I am on the road and didn't feel like risking any warranty issues. When I get home I will try and...

So it turns out it is a design flaw on the leafs. TerrainTamer got back to me and said I should just remove the bolt and bend the clips over the top leaf. (Please see attached picture) They said they will move the clip position in the next product batch. Since the clip is just boltet onto...

have just installed TerrainTamer parabolic Leafs on my 75 series. With them came anti inversion shackles. My problem is now that the shackles hit the leafs all the time.. well not the leafs but that little bracket thing. (Please see attached pictures.) Any idea what is going on? Did I get the...

Thanks that is exactly what I needed

So I thought I had all the information I needed in the 3 instruction manuals I have. (See attached pictures) But there is absolutely nothing about the rear brakes? And now I need to replace pads.. Does anyone know what manual to get or if it happens to be online somewhere?

I have a 1995 hzj75. I needed a longer handbrake cable to make room for a toolbox under the tray. I have installed a handbrake cable from a 79 series and the length is perfect. But it seems like the adjustment is a bit different so even though I have loosened the little nut on the actual...

Finally done fixing up the truck and especially the engine bay. Unfortunately the old firewall dampener is dead and in the trash. I have not been able to find a new or used. So what can I use instead? I was considering a Dynamat Hodliner but are a bit worried it will soak up spray water and...

Has anyone here installed new engine mounts and felt any reduction in vibration and noise? Mine has more noise than I like, especially when idling. I have already installed sound deadening material in the cab but was wondering if it might make change for the better if I installed new engine...

I am building some storage boxes underneath the tray on my hzj75. It's for storing legs for my demountable camper. So it will be a long box from side to side and now the handbrake cable is in the way. Has anyone tried to make or has been able to buy a longer cable to route differently. Would a...

Hello everyone My hzj75 overland camper project here in Denmark is moving along (slowly) and should have a "finished" box within a couple of months. Then I need to fix a few things on the car. One of them is a worry I have had for some time and that I hope you can give some advice on. Chassis...

1

Update. I first installed a clear line just after the prefilter and directly to the fuel line to the pump. No bobbles there. Then I installed the clear line after the original filter/primer and there is clearly bobbles. Also when pumping the primer it does never become completely hard. What...

1

Could it be possible that when the engine is pumping out the fuel of the diesel tank that it is creating a vacuum? I there is a valve thing for that.?

I have installed a brand new original filter + added a flash live prefilter. Tank had been completely off and cleaned, and I have replaced the little in tank fuel filter.

I have a hzj75 1994 with the 1hz non turbo. I just got it and did a longer drive today. When going down the highway between 70 og maybe 90.. keeping the same speed. Sometimes it felt like it was pulling just a little less than normal. Like I suddenly had a stronger headwind (the was absolutely...

s

Where is the rust.

Hzj75 or hzj79 for overland camper

Various pictures my toys

My offroad trips

My build thread

Various pictures my toys

My offroad trips

My build thread