Search results

Hey guys, Sorry for the delay in this. I’m ordering the laser cut parts tomorrow. I’ll drop each of you a PM re payment and shipping/ collection options.

Done. 1. Felix2556 - DIY Kit 2. Sam - DIY kit 3. Markmd- DIY kit

Hi Rayzfzj I'll look to order the components at the end of the month if there are enough folk committed. If you'd like one please add your name to the list in the post above. Also state whether you would like it complete or as a kit. Weight is estimated to be approx. 42kg. Cheers Ryan

Hey Felix, Sure, Might be wroth starting a list on here for anyone interested. I can hold off ordering the cut and folded parts until the end of the month. If anyone else is interested please add your name so that I know how many kits to get cut. 1. Felix2556 - DIY Kit

Hi Indie, No plans to make these for the 100 series, sorry.

Hi Tachycardic, Weight will be approx 42kg. Yes, can offer them welded and powdercoated for £900.

I believe anything pre 2007 is fine. I've had a winch bumper on my 80 for over a decade now, never had an issue. It's declared on my insurance as well.

Thanks. I have, and I'll likely do some more bits when I want them for my 80. I've found there to be very little interest in 80 series products, hence I'll post up when I do bits for myself but won't be actively developing product for them.

Hey Guys, I'm going to making myself another winch bumper soon, would anyone ben interested in a DIY weld together kit? (I've posted this on Facebook and seems to have generated one interest, hence I thought I'd check in here). Bumper construction is a combination of 4mm, 6mm & 8mm Mild...

Hey Guys, Just a quick update on these. I have all the laser cut parts and components (Hinges, locks, gas struts etc...) in. I am now just waiting on the Window rubbers, which I have just been told the order has been part dispatched (enough for 5 sets of gull wings, the remainder are to...

I figured a few more action shots added to the thread wouldn't hurt...:smilingimp:

Hey Guys, I'd be happy to knock a set of these up, I have my 80 and the 3d Scanner so it should be a fairly swift exercise. I do however have a Cargo barrier panel system in the works that will work with the gulwing doors and also allow for an optional cargo shelf. But if folk just wanted Molle...

HA, just seen this! It was great to meet you and discuss what you have planned for your 80. We could probably have talked for several more hours on the topic of cruisers.

Hey Guys, I'm currently waiting on parts arriving (rubber gaskets and the like) as well as some additional tooling to enable me to cut one of the parts. As soon as the gaskets and new tooling is on I'll able to move ahead with the first batch. Appreciate you patience, and I'll be sure to...

@Julian couls you send me photos of the underside of your FJ. Happy to have a look And see what we can come up with.

Hey @felix2566, This is one we did a while back for a member. We Fabricated this one out of Aluzinc. It replaces the stock tank and utilises the existing plumbing for filling and the pump. Holds just under 140l. Bit more about it here: Post in thread 'My 80' My 80 - [Leaving Land...

Hey @MisterCruiser, They bolt onto the chassis rails using existing holes and a captive style nut. I’ve had them on and tested them but found they flexed a bit more than we wanted them to when lifting the vehicle with a jack on the sliders. You can’t really use the same style of fixing as...

Hey guys, Thought I’d post a quick update on the 90 series sliders. Did the test fit today and all looks good. Going to make a minor tweak to the plates to allow about 10mm adjustment on the height of the sliders. I should have these wrapped and off to the powder coaters pretty soon.

Hi @uHu, I have looked into the legality side previously and it seems to be a very grey area. There seems to be definitive guidance on Bull bars being illegal. But winch bumpers seem to be ok as long as they are mounted for the primary purpose of fitting a winch. There was a thread about this...

Thanks Mick. First set of sliders currently underway:

Hey Guys, I'm posting up a few Polls to help me ascertain which products to focus my attention on. (EDIT: I can only post ten options per poll so this thread will be duplicated for the 100 series and 90 series land cruisers) So as I have mentioned on a few threads, I'm finally in a position...

Hey Guys, I'm posting up a few Polls to help me ascertain which products to focus my attention on. (EDIT: I can only post ten options per poll so this thread will be duplicated for the 80 series and 90 series land cruisers) So as I have mentioned on a few threads, I'm finally in a position...

Hey Guys, I'm posting up a few Polls to help me ascertain which products to focus my attention on. (EDIT: I can only post ten options per poll so this thread will be duplicated for the 100 series and 90 series land cruisers) So as I have mentioned on a few threads, I'm finally in a position...

Hey Guys, As some of you may, or may not, know I have a metal fabrication business and have been threatening for some time to start making accessories for Landcruiser’s. Whilst I haven’t posted much I do have several products in development. One product I always wanted to make was the gullwing...

Thanks @fbnss @RLC Just sent you a text

Looks like an epic project, looking forward to seeing he it shapes up.

@Lorin Cheers dude and thanks for the suggestion to look at the Bowfin Rack, hadn't seen that before. I'd definitely off an option for a cutout deflector to accommodate a LED light bar and would very much want to incorporate an option for an awning mount which I have a few ideas on but would...