Search results

Are you saying that the 06 lc5 is worse for economy than the 05 lc4?

enough said really. Transmitted on More4 at 9.00 pm.

Yes they are really good. I'm glad you found them useful. Just spread the gospel.

Cree, they give the highest light output. Excellent service by suppliers, ordered them one day and they were delivered the next.

Hi after much searching I found these reversing light bulbs that fit the 120 perfectly https://m.ebay.co.uk/itm/Reverse-Light-Bulb-15-SMD-LED-W16W-T15-955-921-For-Toyota-Yaris-Vitz-10-On-/352283515338?varId=621710101913&txnId=1027989599022 The light output is like night and day!

Hi Simon could you let me have a copy of the manual as well. Best regards

Hi, Did you ever get this sorted? What was the problem?

I ordered one on Wed, you must have got there just before me. Now have to wait 2-3 weeks.

Hi, When did you order your item? They are now saying out of stock.

Milners are out of stock at the moment. Should be back in stock in 2-3 weeks.

I had a quote from Mr T last year to replace the joint and they wanted £700, £270 for the part and £430 for Labour. You can buy the part on ebay (Claims Toyota Orig Part) for £140. Be careful with part numbers there are a number of variants. Best to use https://www.toyodiy.com/parts/q.html to...

As I said its the lower steering column joint u/j seizing up. I am having the same problem. Sometimes its ok then the weather / temperature changes and its gone stiff again.

I think you will find that it is the lower joint on the steering column starting to seize. It can be relieved temporarily by spraying the joint u/j with wd40 (or similar) and working into the joint. If the steering goes stiff then loosens off like a 3d bit as you turn it, this virtually...

Ok, thanks, job for tomorrow.

Hi, I have just bought a set but not yet installed. Where did you put the control box?

Call Toyota and complain about the dealer and lack of info from them. I have done similar in the past with good results. You can get a number from their web site.

Not worth £9.5k

Had the same problem was Anti-Roll bar bushes

I forgot to add that Overland Cruisers frequently remake the Panhard Rod mountings on 120 axles.

The one listed on the web is for an LC3 with REAR DIFF LOCK. Normal ones are different but Milners can supply. I asked for a quote and if I remember correctly it came in at about £600 inc VAT delivered. Don't forget you will need other nuts bolts etc. You might want to do bushes etc whilst your...

I think you will find that it is a siezed (or starting to sieze) steering column universal joint. Often feels like a thrupenny bit.

I would be interested as well.

I would recommend a 3" stainless exhaust direct from the Turbo. The standard exhaust is restricted at the turbo. It should rev more freely and have more go without the worries about whether you might be potentially damaging the engine or not.

I assume you mean 6 Speed manuals as well. Unfortunately the number of gears is NOT an indication as to which engine is fitted. Mine was registered in Nov '04 with a 6 spd manual box but, fortunately it would appear, has a 163Bhp engine.

At 90,000 you will need to change the Cam Belt. I gather that it is recommended to change the Cam Belt Tensioner and also the Water Pump. At 90,000 a warning light will illuminate on the dash panel to inform you of the impending change. All this assumes that it has not already been done.

...or on the other hand, make a holiday of it. Get a list of vehicles that you are interested in and take a week or so to tour round looking at them. Takes the pressure off travelling to see a car and then shall I or shan't I buy it. Then if you decide not you are wondering all the way home...

Hi, I looked on AutoTrader for you and the nearest I could find for you is about 100 miles away with 106k on the clock for 10k. Price seems to be fairly proportional to mileage done, Lower mileage, higher price. When you do get your LC get the underside/chassis treated and undersealed. I had...

Only problem has been with the locknuts getting very loose on the thread. In fact I don't use them any more.

Just had all 5 wheels refurbed - they look like new now. No more tyres going down. Used to have to pump them up to 40psi then watch them droop off to 18psi over 1,2 or 3 weeks, which was variable. Reasonable price £310 all in for 5 wheels. Worst thing was being without vehicle for 3 1/2 days.

Apparently the downpipe from the turbo is a smaller diameter than the turbo output and restricts the exhaust flow. Better off getting a 3" system from the turbo back. Have a word with Overland Cruisers. I had some work done there in June, Derusting, dinitrol etc. Apparently my middle box needed...

Milner has front and rear disk and pad kits for about £120 all in.

It is in the age range for Injector seals. Mine is a late 2004 LC4 and had to have a complete set of injectors due to the seals recall. I suspect that the one you are looking at had to have it's crankshaft replaced when the Injector seals were done ( assuming they were ). If that was the case I...

You could always add one of these mounted on the dashboard as a temporary solution.