Search results

https://www.ebay.co.uk/itm/Toyota-Land-Cruiser-HZJ76-LX-2014-LHD-you-won-t-find-another-one-like-this-/304351002909?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=710-127635-2958-0

Well I've finally decided to sell my long range tank after buying a cruiser which already has a big tank! Obviously could be fitted to other vehicles with modifications.(under an 80 or 100) I'ts a front runner tank 160L made for a 70 series, details below...

Hi all, well I've had my cruiser for just over a month now and was a little worried about how high I can get the EGT readings and it goes a little too well, I fitted a boost gauge yesterday and my concerns are correct! its running just over 20psi and I know 10psi is a safe bet.. Today i have...

Anyone interested in going to this? clubs get a discount! http://thebigoutdoors.org

Well after 5 weeks of negotiations I finally picked up my new toy, Its a HZJ76 LUX with factory lockers, air con. It was imported by Nene back in January and then fitted with the list below but then the owner found that he couldn't take it with him to brazil, so its been sitting round since then...

Friday I ftted a new 82 degrees thermostat as i found unless pulling my trailer around the 71 degrees stat was making my engine clog up by not running hot enough, i also fitted a new aisin viscous coupling and new water pump, the new cast bodied water pump has alot bigger high flow pump inside...

For all you kzj70/78 owners out there, rough trax have just got in a batch of couplings original fitment ones http://www.roughtrax4x4.com/aisin-viscous-fan-coupling-7436.html

Hi All, Im about to buy a compressor and tank combo and there are two runners up.Both the same price. One the Viair 480c with 2 gallon tank, good size tank and high pressure 200psi not the best compressor output 50L/min but looks a good bit of kit, would need a regulated to use it with lockers...

Anyone got a tidy one?

Can anyone tell me what temperature the red antifreeze goes down to? Considering it's already pre-mixed. I need it good for about -70 which I normally get from vertically neat blue antifreeze I've used in the past. My local Toyota can't tell me but are trying to find out. They say "Should be...

After reading all the threads on this I can't seam to find the exact amount of oil needed when fully drained? any ideas? Following the the video last time I put in 100ml which I think was too much.

KZJ 78/70/71 LJ70/73/77 rear n/s half shaft/ axle needed Hi All, as above I need a rear n/s half shaft/axle or even a whole axle but must be disc brake. Or someone who does discounted new parts?

http://www.horizonsunlimited.com/events/hubbuk-2014

After years of fettling with my electric hubs I finally gave up due to excessive wear inside and fitted some shiny AVM ones from euro4x4 parts and I now have reliable hubs again, they seem simple but well built.

Hi All, I have 4 x 33x12.5r15 general grabber at2 tyres with at least 10mm of tread on black 10x15 steel wheels, they've done about 4000 miles to the top of Norway and back they have the ice rating on and were brilliant on the snow and ice. The wheels are for an 80 series although I had them...

http://youtu.be/E2DcIsRIHCY

Hi All, has anyone got the tube like tool for pushing the rear axle shafts out of the bearings or know a garage that can do it in the Bristol area? My vehicle is a KZJ 78 but I'm sure it's the same for others?

Hi All, anyone have an air con pump for a 1kzt-e engine?

Since rebuilding my engine I've started using red anti freeze but it's started leaking out of everywhere, even joints that have never been apart before and seems very corrosive! is it really that much better and really worth the hassle? Or or can I please go back to the blue stuff..lol :crazy:

Can anyone recommend a supplier of a good engine gasket set for a 1kz-te?

Hi all, has anyone changed their liners in a 1kz-te engine? After driving back from morocco at Christmas I developed a tap which turned out to be excessive wear on one cylinder caused by a blocked cylinder lube jet, the lip round the top is at least 1mm and I feel too much to be bored out so...

Hi all, where's the best place to source some piston rings and small end bearing? there are a few sets of rings on eBay but I don't know whether they are of good quality or not. But no small end bearings! Or is it something that I need/should buy from Toyota? Thanks in advance.

sorry I know this has been talked about before but just wondered is anyone has any info or had experience of the cylinder heads that are available. First one is a company on ebay selling heads with bolts and the latest 5 hole multi layer head gaskets. Item number 330433657921 @ £549 with free...

http://www.euro4x4parts.com/parts/kra1324-2150_radiator.html

The wheels are located in portishead and instead of taking them to the tip I'm offering them to you lot. I'm sure there are a few 70 drivers in Bristol on here that run these wheels. They have the usual small surface rust patches on them but are straight. The wheels need to be picked up by...

My little toy for green laning and trips

Hi all, I'm after some rear calliper's for my kzj78 and see that Milner sell them, has anyone had any experience with Milner calliper's? Or does anyone know someone else that sells them?

Busy day yesturday bumper building.

Anyone had any experiance with these? And I'm guess they will fit my KZJ78 wont they? surely not all axles have the same? http://gearingdynamics.com.au/Split-CV-Boots-For-Toyota-LandCruiser-78/-79/-70/-80-Series Emailed them and they want 90 Aus dollars and 65 for postage..

Hi All, I have a pair of OME 2875 rear springs which are +40mm lift and have been fitted on my KZJ78 for about an hour as I realised the original spring hadn't sagged I just needed stronger springs (80 series springs now fitted).. obviously they are still in their original box and only have...

Hi All, Asking all from Sweden and anyone who’s driven through Sweden. A few of us are driving up through and around Sweden leaving on the 3rd Jan ona ferry from Harwich to Denmark for a couple of weeks and then roughly takingthe route below. I was just checking to make sure were not missing...

Hi all, I currently have a OME kzj70 +40mm spring kit on mine and need more height due to carrying a lot of kit, not many people list different springs for either the 78 or 70 but reading between the lines, are the rear springs the same as a KZJ 95 springs and some sites list them along with...

Hi all does anybody know the back spacing on the standard chrome 15" wheels on a 70 series? Ta in advance