Search results

Does anyone have? 3rd row actually.... Mine were 'mint pre accident'... The accident being that the rabbit was in its box and the dog was tied in to the second row seat lock on the floor.... I have two metal frames intact. They don't often get used but very useful on occasion. On the...

As above. Autoglass cannot do it for two weeks....does anybody have one. Karl -I did PM you or at least I thought I did.. OR is there anywhere you can just buy a new glass (except Toyota). I think becasue Autoglass do supply and fit this pushes the time out. I am happy for just the glass, Thanks

SSR. Dc-Dc... However they are only single action, so one for Dip and one for Main beams. The voltage range is quite broad and they are din rail compatible for extra cooling or mounting options

Ok so I bought 2 X front calipers off eBay from a reputable seller. Changed all my lower brake components...cannot get any front brakes. Made a pressure bleeder from a garden sprayer and nicked the filler cap from my father's previa. I have fluid coming from every outlet and in any direction I...

I am replacing my flexi hoses, but didn't see anything listed as 'Extended' as I am running a Plus 2" spring. Is this not and issue on the 80 because of the location of the relevant to the direction of travel of the axle or what have people used?

I have recently acquired a Renault K9K 1.5dci. it's an early generation mode without common rail, but loaded with crankshaft, camshaft and a few other sensors, egr etc. I'm wondering if there is an inexpensive way to get it running without the original loom? I did a quick search for an simple...

I can't complain having never changed a Hardy Spicer since I bought the truck 70k miles ago, and don't know the previous but with 255k on the clock they are beginning to wear. What brand are people going with and how long do they typically last? Has anyone bothered balancing their propshafts...

I thought I would take advantage of the recent spell of high pressure to execute some paintwork repairs that had been bugging me for a while... The left hand 'bumperette' had been in close contact with a Victorian parking bollard and the NS front splash guard had some lacquer peel which...

Has anyone replace the weather seal on their sunroof Toyota 63252-60010 and did it solve any leaks? I have cleared the drain holes and tested with the hose pipe an there was a steady stream straight in on top of the seat. Not down the pillar or in the corners just straight down at the edges...

Has anyone installed or considered a propane injection on a diesel 80 series. I was thinking of trialling it as diy install before investing in a real kit but wondering if anyone had prior knowledge? Admittedly, I haven't come across it on any threads but possibly someone has had it on another...

well not exactly a rebuild but interesting. A 60 with a whole 5 gears??

I have had the dreaded leak on my PS system for about 7 years but its just over the O/S hub so Im pretty sure its the box/hose not the Pump as its on the N/S?. However there seems to be a droning noise from the eng but yet it doesnt sound like it is the engine itself. I have put endless tubs of...

I am trying to remove my rear bumper corners to get them paintmatched and resprayed. I have taken the mudflaps off and the bolts from the rear underside lip, however its still not budging. Surely the cross member doesnt have to come out as well? If not then where are the bolts that I m not seeing?

So I'm looking for the ultimate shortcut, does anyone know if the 100 series panhard rod is the same leength as an 80? I'm actually hoping it is marginally longer with the 100 series being slightly wider.

Does anyone happen to have a standard front spring lying around? There is a reason to my madness I failed mot on a broken passenger side one and pedders wont have any stock until late next week. Retest is Monday otherwise its another 4 weeks to wait. If it has to wait it has to wait..

Is anyone here using Koni Shocks on their 80? I'm thinking of fitting them but versus OE how do they rate. Im just looking for a reliable set of all rounder but mainly for road use. Was also thinking of fitting extended shocks with the view to a 2" lift further down the track. Has anyone used...

If I return to the home page after logging in and viewing other topics on the site, I get logged out and have to log in again which is a real PIA. Just wondering is our site run by a Rangerover Techie?

Does anyone have a paint code for the grey colour used on the bumperttes and front bumper?

I recently stumbled over a 40 series (2 of) but haven't been up close yet. The owner tells me they are petrol but getting into them is a days work also. Is there much difference between theBL and BJ40 and are they easy converted to Diesel. The bodywork on one looks ok but no idea what state the...

So I saw this ad on the home page and thought, nice one mods..however that was two days ago and still waiting on a pm -whats going on?

Is anyone involved with transport or logistics? on a recent trip to Holland I bought a secondhand cargo bike and used it for a week whilst there. I would love to get it home but it's a real nightmare to get anyone to courier it. I reckon I can get it to Harwich via hook of Holland but it's a...

A friend of mine has recently changed a blown engine in his Prado for a blown engine from a breaker! The only other engine he could get was out of a 3.0surf. He installed it and had to change the sump, exhaust manifold and the Injection Pump. Engine starts and runs fine on tick over but there is...

A Rather humorous take

How do other 80 owners find their truck handling in the snow/ice without CDL engaged? I am beginning to think mine is excessively tail happy and wondering if this is the symptom of a failed VC or is it just characteristic of 80s.cant say I noticed it before but its a long time since it was...

Does anyone have a knackered rear locker taking up room in their workshop? Mine has had an intermittent problem and I have just worked out that the rotor shaft is bent. I am guessing that when my father rebuilt it for me a few years ago he tried to clamp down the housing without the bearing...

as per title only to find that nothing works....my conclusion is that the inner cable is just too long. Design fault -end of. My old cable had two clamps fitted to remove about 10mm out of each cable. Now another question arises in how tight should the swivel lever pivot bolt be, where the...

Does anyone know if 100series rear springs fit an 80 series? we used to fit Nissan patrol rear springs to shoguns for offroad and they seated no problem so wondering if the 100 series springs do the same and assume that they are higher rated due to the extra weight..

Ever since I had my truck there has been a real problem with condensation on the interior when it raining heavy. Even with the fan on full speed it wont clear the front window and its worth if there are extra bodies in the truck ( just the live ones). Is this an 80series feature or is my fan not...

I was recently in the market for a cordless rattle gun and found this Canadian youtuber BOLTR. I could only imagine getting him to do a teardown on a landcruiser!

ok so how much grease is ok to have on the abs rings? I have been having an intermittent problem with my brakes/ABS it feels as if when the truck is about to stop the abs activates and lets go the lefthand front brake and the truck pulls sharply to the right but its only at the very last...

As above, I have destroyed yet another one with my non SST. I gouged the seat with a screwdriver at a previous attempt and it has been bending the seal lip when I bash errr gently press the seals into place. Toyota are 3-5 days on average for this part so wondering if anyone had one GENUINE seal...

Does anyone on the forum have experience with the techstream software for Toyota/lexus? I recently got a laptop with the software on it among others but there were no leads. I bought a generic USB to OBD II lead but it doesn't seem to communicate with the software. It will connect with other...

With the rather unique 5 stud bolt arrangement on the 100 series, what are people doing when it comes to upgrading? Is it bet to go with 17 or 18" rims and what offset options are available? Say I was targeting a 33" tyre then what is the best way to do it. Had a quick google but 5 stud 17"...

I recently replaced my master cylinder with a milner one, However I now have a constant red warning light on the dash (not the handbrake one). The same one that shows low brake fluid level although the brakes a re stopping ok and have been bled extensively. I suppose my question is what are...

I'm wondering how many of the members here are into boats/boating? I'm trying to source a pair of Yamaha 90 or 115hp 2 stroke outboards with long shafts for my rib project....been on the usual websites so of course everything is gone within minutes but still haven't come across what I'm looking...

I was thinking of buying an injector removal kit with the idea of removing one injector getting it checked and reconditioned before pulling them all. I see a lot of different kits on ebay from 12- 40 piece and wondering if anyone has any experience of these or is there a specific type or size...

How do you remove the bulb on the tailgate foglights? I unscrewed the unit but it looks sealed unless you have to prise the lense off and take the bulb out that way. The bulb holder doesn't appear to have any barbs or release on it. Any Ideas.....

Does anyone happen to know the paint code for the grey bumper and corners on the 93-95 models. (I assume its the same the whole way through the years but in case its specific to the model variation) I did remember seeing a chart online somewhere but cannot find it again... I hadnt realised...

I stumbled across these and to me it seemed like a good deal but wondering if anybody has one, used one or knows anything about them. They even have a stove pipe flap in the roof... http://www.stamoutdoor.nl/product/command-post-us-army-legertent/

Does anyone have or know where a pdf copy of the FSM can be located for the 120? My briother in law has one in OZ and its forever giving grief! he's pretty handy at fixing it but finding the sensors that the fault codes are showing isnt proving as easy..

When I took my door card off to insert the new window rubbers I noticed to nice bnig gaping hole where speakers could go. I dont have speaker grills in my door card so as 93 VX did it ever have speakers in the front doors? If not then do speakers fit in and what size are they?

Does anyone know how much a replacement petrol engine is and have they indeed ever seen a petrol 120?

how much money does one expect to pay for a second hand petrol engine for a colorado??? p.s nobody saw me in here....

I see we are due the first snow of this winter here in north wales on sat evening into sunday....just need to put all the rear locker bits back into the case and hope it works!

Does anyone have experience towing cars around ( except landrovers :laughing-rolling:). I'm wondering how it works in terms of Insurance. I am looking at buying a salvage car with a value of 10k+ and just had a thought about how its insured for collecting and trailering it home. It may be catD...

I picked up a 20ft boat from Falmouth last weekend and towed it to North Wales (via Bala) and probably the first time having towed a fairly decent weight ( 2700kg) over a big distance. If anyone has driven from The southwest up toward the M5 on the A30 it is pretty undulating. However once the...

Or has it had a respray?? http://cars.donedeal.ie/cars-for-sale/amazon-4999-stg/8786547?offset=8

Anyone using a hydraulic winch on their truck? I see a lot of the cheaper models are actually electric driven pumps as opposed to PTO units. Whats the deal on them in terms of speed and braking power v the standard electric winches. Very curious to know if its worth spending £500 for a HW as...