ACSD

[Mblinko]

Is it possible to buy these still ?

 

[Shayne]

http://www.euro4x4parts.com/parts/ipx1002-2183_injection_pump_automatic_cold_start_device_acsd_22790-17141.html

 

[Mblinko]

Thx, I googled before and got this .... can’t see a difference.

 

[Lorin]

IIRC it is no longer available. Not needed unless you live in VERY cold climate. Can buy a blanking plate and it’s job done. No need to adjust timing or touch anything else.

 

[Iwan]

With out a shadow of a doubt, take it off and throw it in the bin! Fit a new O ring and blanking plate with the correct length of allen bolts.

I have seen the result of a broken one where the pin detached and scored the inside of the pump and it was ruined.

When it was circa -20 my 1hd ft didn't miss a beat, just more important to let the engine warm up before laboring it smashing snow drifts!

 

[Mblinko]

I’m leaning towards this solution but who can sell me the o ring and plate ?

 

[Lorin]

Genuine P/N is 096218-0270

Bosch part numbers for the same:
-blanking plate 1461074312
-viton o-ring 2460223001

I imagine any diesel pump specialist would have them

 

[chapel gate]

Still available.
About half the price of euro 4x4.

I replaced mine ages ago with a new one.
I like the "choke" effect on winter days.

 

[chapel gate]

Easier to buy one, but you can soon knock one up.

 

[Mblinko]

Still available.
About half the price of euro 4x4.
......

From Toyota ?

 

[chapel gate]

From Toyota ?

yes, via chapel gate.

 

[Mblinko]

yes, via chapel gate.

PM sent

 

[Redwagonrider]

Would you be interested in shipping this delete plate across the pond? Thanks

 

[Towpack]

Try your nearest diesel specialist. The blanking plate is generic, to a degree and fitted to other pumps plus the pumps on the LC engines will be used on other vehicles. I got one from a local diesel shop for free as he had a few of them lying around.

 

[Towpack]

These are the dimensions I drew up years ago if you want to make one.....

 

[Redwagonrider]

Yep, they got em for $15 bucks. They say they also have a stack of old ve pumps and might be able to get me a fueling pin I can modify. Thanks for the diagram. I’m sure it will be helpful in the future.