jef
New Member
- Joined
- Jan 19, 2016
- Messages
- 15
- Country Flag
I had trouble with my ABS coming on when coming to a stop, there where little pieces of metal on the magnet of the ABS sensor, cleaned out the front knuckle and replaced all the grease and seals (also had diff oil leaking into the knuckle) also no real damage to be found or seen, CV joint looked ok.
Put it all back together for the technical inspection (Belgium) to register it, but immediatly had ABS problems again. This is how the cv looked after I pulled it out again:
Large chunks missing from the abs ring and damage on the outside of the cv, no foreign objects or parts found in the knuckle other than the sheared off pieces of the joint.
Can anyone explain this?
Put it all back together for the technical inspection (Belgium) to register it, but immediatly had ABS problems again. This is how the cv looked after I pulled it out again:
Large chunks missing from the abs ring and damage on the outside of the cv, no foreign objects or parts found in the knuckle other than the sheared off pieces of the joint.
Can anyone explain this?