Chas
Well-Known Member
I will soon be getting the wall muncher back on the road so the green 80 will be going. I thought the drawer unit might be wanted by someone on the forum. I will be at Lincomb on Saturday if anyone wants to see it or even take it away with them. 
The person I bought it from ran a landscape gardening business and carried all sorts of gardening equipment in it, he had this custom made at a cost of £1000,
I would like £200 but I'm open to offers.
All steel construction, the drawer runs on large ball type bearings underneath, it was built to carry a large amount of weight so no runners to collapse. There is a swivel catch to prevent drawer coming out too far. Lockable turn handle with key.
The measurements are
Internal is 50" wide, 37" front to back, doh! forgot to measure the internal depth of drawer
External, 53" wide, 38" front to back.
With tailgate up you can see the height is level with the top.
Tailgate down, unit is full width of door opening.
R/Hand side there is a gap of about 4".
L/Hand side there is a gap of about 4".
Drawer open from L/H side.
Drawer open from R/H side.
Drawer open from rear.
I covered the top surface with a non-slip lino type material that came from British Airways, I have a contact in their service dept, it's used in the galley area of the aircraft, the trimmed the edges with ally carpet edging.
The person I bought it from ran a landscape gardening business and carried all sorts of gardening equipment in it, he had this custom made at a cost of £1000,
I would like £200 but I'm open to offers. All steel construction, the drawer runs on large ball type bearings underneath, it was built to carry a large amount of weight so no runners to collapse. There is a swivel catch to prevent drawer coming out too far. Lockable turn handle with key.The measurements are
Internal is 50" wide, 37" front to back, doh! forgot to measure the internal depth of drawer
External, 53" wide, 38" front to back.
With tailgate up you can see the height is level with the top.
Tailgate down, unit is full width of door opening.
R/Hand side there is a gap of about 4".
L/Hand side there is a gap of about 4".
Drawer open from L/H side.
Drawer open from R/H side.
Drawer open from rear.
I covered the top surface with a non-slip lino type material that came from British Airways, I have a contact in their service dept, it's used in the galley area of the aircraft, the trimmed the edges with ally carpet edging.
