Don't like the adverts?  Click here to remove them

Need help in locating a 40 serise part

Bullet Proof

New Member
Joined
Jan 6, 2015
Messages
26
Country Flag
united_states
Hi folks I am just finishing up a full Australian Toyota FJ45 restoration. I am now getting ready to installing the factory PTO winch but to complete this I need a few parts.
The parts needed are the drive shafts with hangars and the PTO gearbox. The gearbox needed is of the 1981 and newer derived form the split case trans.
It has the bolt pattern straight across from each other compared to the older gearbox where they were offset from each other.
If you have one in your old box of parts and not needed please consider helping fellow builder out if possible. I will also be interested in any other PTO parts you may have to offer.
Please contact this post with information and I will responded ASAP.
Truck is in the US now.
Cheers
:flags-australia:

0000000000 copy.jpg

P9139539_1 copy_edited-1.jpg
 
Last edited:
That is one good looking cruiser thanks for the pics love it from Tony.
 
Thanks tonytoyota, been a bit of work but she's a keeper. The Police theme was something we put together to put on it for a few car shows when we had a chance.
As posted just need a few more parts for the PTO to make it completes again.
I see you hail from Wrexham, I grew up just up the road from you in Liverpool. That was some time ago.
Enjoy

My FJ40 and 45
_8142799.jpg 5-5-20131-250 s 6.jpg
 
Hi I have the same 40 and 45 with hj60 runing gear in them and. I love all old 40 the 40 is blue and 45 red and white
And how long was it you grew up in Liverpool thanks Tony .
 
Mums from Liverpool dad US -1969 - 13 years Liverpool (all family still there) 5 years London, then to the states were we are now.
 
Don't like the adverts?  Click here to remove them
hi mate

i can sort you out with those parts i think, send me a PM

Giles
 
Update, found a PTO gear box so that is taken care off, now just need the drive line bits from the gear box forward. Any parts or complete even if its a bearing hangar or a yoke or a bent shaft. Just PM me with you information on the part.

Picture curtesy of Giles -


shaft 1 copy.jpg
 

Attachments

  • 022.JPG
    022.JPG
    423.1 KB · Views: 126
  • ImageUploadedByTapatalk1438775579_158951.jpg
    ImageUploadedByTapatalk1438775579_158951.jpg
    326.9 KB · Views: 101
Wow I feel as I just woke up out of a comma - was working to much and web site was down but to all prior the PTO has been completed if not reported before.
IMG_20151230_115524173.jpg
IMG_20151230_115611292 copy.jpg
 
Back
Top