Recent content by Vlex

If you don't have a OBD2 plug, than it's a OBD1 truck, and you can use the "paperclip method" to pull the codes. 1. Acquire paperclip 2. Open the hood, locate diagnostic plug on the passenger side firewall near the top. It's black and probably 1.5"x3". 3. Open cap to diagnostic plug, on the...

@grantw Did you receive your rear bumper? I'm very interested in the Wink4x4 design.

I first thought that it was the PHH, but I don't remember it being so accessible? I could be wrong

It's hard to see, but that does look like a coolant hose. If it's a straight hose, all you need is a piece of 16mm coolant hose (or 5/8"). Also check if the hose clamp is still ok, I can't see if there even is a hose clamp on? The routing of the hoses do look different than the 1FZ-FE's that I...

There is indeed a fusible link at the back of the socket. This prevents the socket getting to hot and usually blows before the fuse does. You can remove the nylon spacer at the back of the socket to bypass the fusible link. For normal use the socket is still fused trough the fusebox, but i...

Various pictures my toys

My offroad trips

My build thread