Search results

Hi can someone share the connection schematic (electrical + pneumatic) sketch and an actual photograph for turbo pressure sensor and VSV of Turbo pressure sensor of 1KDFTV (Prado 2001). cheers Farhan

what is the part number of the turbo assembly of my Prado 2001 - 1KD FTV. is there anyway i can physically verify the part number. plus does any body have experience of using the Chinese rebuild kits in the turbo assembly (see attached pdf). cheers Farhan

well got it checked by opening up the exhaust pipe, it is a hollow piece of pipe (it may have been a catalytic converter in earlier life but may have been emptied out by the previous owner or it may have been a hollow pipe from the start)

additionally - the needle does move a bit from the dead level to C and a tick above C when the engine achieves normal temperature.

Checked the coolant temperature sensor's resistance as per 1KD workshop manual - it was as per specs and equal to another replacement sensor replaced the thermostat valve with a new one checked the engine coolant temperature by connecting the scanner after it had idled for 15 ~ 20 minutes, the...

engine temperature gauge needle stays around the C mark on my Prado 2001 1KD. i am cruising on main roads without any passengers / load. the ambient during the driving is 18 ~ 20 deg C. is that normal?

cheers MODVRS my NORTH is now sorted. that worked

had the same issue, door mirrors kept goig past the required position and later on folding on to the body. you can manually move the mirrors in the desired position accompanied with a loud clunk. after this hopefully the mirrors should work fine with the motor. however if this keeps happening...

How does the compass on Prado dashboard work. Does one need to calibrate it. On my vehicle the display just remains the same. See attached photo

Another observation Yesterday I floored the accelerator on the highway, initially there was a big cloud of black smoke from the exhaut. I did the same 4 times and the black smoke reduced each time, finally there is minimum black smoke coming when I floor the accelerator. The engine is also...

Timing belt with the bearing is new Suction control valve.... Hmm, how can I further diagnose this. Quality of diesel is a question mark in Pakistan, however I buy from an outlet operated directly by the refinery who certify that their diesel has a low sulphur content. However the engine...

Wondering if I have a catalytic convertor on my vehicle. 1kdftv 2001 Prado. See the attached photo that I took from underneath.

diggerdave thanks for the reply fuel filter is new air filter is new checked the egr valve a month ago - clean as a whistle can you elaborate on the idle speed - the engine idles at 850 rpm cheers

experiencing rough idling and knocking and rattling from the engine at low speeds. Particularly when i stop at traffic lights and when i am accelerating from stop. noise goes away at higher speeds. replaced the injectors 03 months back, sound was there before the replacement and still is. any...

Dear Lekiboy this may be to jog your memory, but i am seeing similar leak on my Prado's transfer box. did the application of epoxy hold the leak or did you have to open up the cover to reapply the gasket.

Various pictures my toys

My offroad trips

My build thread