Search results

7th entry

Mine looks like it has an excessive gap and from the side it looks like it is tilted out slightly from the top but I've had no issues with it sealing. I intend to adjust the hinges as described eklsewhere on the forum as I get the classic squeak but it's a matter of having someone (likely my...

I'm in a similar situation but I suspect my rear chassis is far worse than Oli.g 's sounds, although maybe different parts, as it has not had the work done his has. My plan was inspired by the youtube video of the 90 guy doing a body lift in the street (can't recall the name at the moment...

No worries. People on here have been so helpful to me and it's nice to have the opportunity to help someone else. We had a car for years and we were sat in it one time and my daughter who was probably about 9 at the time reached across and pulled down an extra mini sunvisor that covered the gaps...

HI and Welcome. Don't worry. The system is permanent all wheel drive with a center locking differential. Forgive me for including some things you may already know but for on your smaller transfer case lever you should have the following... LL = Low Ratio Locked Center Differential N = Neutral...

Box does not need removing. You can access from the bottom. Easy to replace the solenoids. No idea of the price though. Sorry. I got gaskets for my valve body from here IIRC www.sussexautos.co.uk so they may do the solenoids. www.automaticchoice.com look like they probably do the solenoids.

It's good to see they are taking health and safety seriously by using face coverings.

Gregory's Prado 90/95 repair manual says the drive shaft retaining nut is 235Nm.

In case it helps anyone else, I have now purchased a Febest part no: 0187-FZJ80 "Pulley Tensioner Kit" which according to the info on the box does a load of Toyotas including various 90's icluding mine. A word of warning though the spindle that goes through the bearing is too short, probably...

Very true & multiple clutches.

Can't be a clutch if they are autos. Maybe a decade?

https://forum.ih8mud.com/threads/gary-rigby-aka-80breaker-garry-80breaker-com-buyer-beware.921232/

Hi. I need the pulley for the tensioner for the aircon belt and the washers that go either side plus the nut although the pulley itself is the main thing as I'm sure I can source the others easy enough. I had a mad rush job to get my cruiser "finished" Saturday as I had to go into work...

As nothing has changed at the users end and many are not having noticeable issues then maybe it is an ISP issue with the time to access something such as those slow ads that a significant part of the load time or some script or maybe a DNS the end user is using. Is it worth looking at what ISP...

Intoxicated persons considering it a great feat to climb on your roof even if you are inside. Also issues with unknown people just trying to get in and sometimes succeeding if you stop for too long (well I suppose it's a fairly safe place to be).

I'm a bit confused here. My Toyota manual says standard pressure at max speed (4600rpm) is 7.4 to 9.7 psi, the waste gate opens (abruptly) at 16.7 psi and the max pressure the actuator can stand is 20.5 psi. I tested my waste gate actuator and it opened the gate at about the spec pressure (gauge...

This is what mine says Front door panel & glass for Toyota Land Cruiser Prado KZJ95R - Amayama - [Leaving Land Cruiser Club] but looks like advance order. I think I can get the wording off my faded one if it helps.. It has bullet points not the numbers in the Japanese version..... /!\ CAUTION...

The law change for the extended MOT is in place for 12 months and the plan is to extend all PLG MOTs for 6 months so that there is not a disproportionate amount of MOTs due in one part of the year to another. Changing the records on the computer takes time and when I last checked they were...

I have many years ago bought ASUS and ACER and both went at the cases by the hinges. My laptops get lots of serious (ab)use. Since then with the exception of 2 Samsungs, I have only bought older an often ex-corporate Lenovo Thinkpad X series and T series which are usually very tough reliable...

Pay special attention to where they made connections. It could be that they used scotchlock connectors that cut into the wires and that they cut through some of the strands increasing resistance to you get a a voltage drop or that where insulation has been removed to make a connection there may...

Hi Towpack, I have not had this problem. The date is the date all Unix time is calculated from though so it might be that someone has genuinely attempted to send you a message and it has not gone through correctly because of an incorrectly (invalidly) set date so the starting date of 1st Jan...

I had a puncture early hours of one morning on the way to pick someone up to take them to hospital. Went to undo the lock on the spare and the prongs of the unlocking key broke (had same problem on a previous vehicle with similar wheel locks). Ended up snapping the plastic cover in order to get...

Careful now. This could be dangerous. Imagine the scenario "What's this Amazon Cosmetics? Where are they? I certainly didn't get them so who did?"

@GeekOKent As per your request (and full breakdown of each request could be made available but would be several pages). This page reload Firefox Quantum 68.6.1esr 64bit with add-ons (Facebook Container, Tabs Aside, uBlock Origin, uMatrix) logged in..... 47 requests 2.03 MB / 100.93 kB...

Is that 2 separate washers a flat and a crush then @CAT ? I thought it was one item. Looks like mine are just the crush like Beau's which also look like the appropriate part I have seen on Roughtrax and other places and looks like you have taken out from the pic with the 4 washers by the 4 old...

I haven't noticed any issues but in the community spirit and curiosity caused me to look a bit further into it. I wondered if I hadn't noticed because I may have been blocking anything with an add-on. First I compared this page to halfords.com both as a full reload in my usual laptop browser...

According to their website Milner are now open for online orders again but the trade counter is closed. I was going to get some oil from Smith & Allan but everything I wanted had sold out. Eurocarparts, GSF and Carparts4less deliver. Eurocarparts do same day and all 3 have big discounts at the...

Thanks for raising this as I will need to get mine out and those washers should be replaced as if not (according to a video I saw where one had not been) the injector can get damaged by heat. My guess (and it is only a guess) is the flat bit goes to the injector to protect it more. Hopefully...

@Moderators please can this be merged with 100 series Prado can't start - [Leaving Land Cruiser Club] and put in the 90 section assuming it is a 90 Prado. Edit: The same question is also raised in the third post of this thread Manual pump install 1KZTE - [Leaving Land Cruiser Club] Thanks for...

Do you mean a clunk but not turning the engine in which case I would go with Iwan's diagnosis but if you mean it cranks but doesn't start then possibly immobiliser if it is recent enough to have one. Does it have the light in the console for it?

My MOT ran out 2nd April but when I checked the MOT site mentioned above initially it gave the same expiry date but later the date was changed to October and there was a message on the site that they were updating records in due date order so the further off the MOT was due the less likely it...

I kept getting wappy lighting issues when towing and traced the wiring of the towing electrics to a bundle covered with tape. I peeled the tape off and the nice fat towing earth was connected to a dead skinny earth cable that went who knows where. Although the connection had been decently made...

My guess would be a bad earth somewhere (check all {body engine transmission} earth cables as well as connections for security and corrosion) that could cause a voltage drop when those items are turned on thus affecting something essential for the engine such as an ecu or a pump or sensor...

Apologies for the thread jack. I have just removed my head from my 98 1KZ-TE and it has cracked in the classic place between the valves on no 3 cylinder and no 4 cylinder. My head is marked 3B, does this suggest it is a later replacement head from Toyota - just curious? Mine did not go above...

I have also used Smith and Allen for several years both direct and via ebay and have been very pleased. They have been around a long time. As far as oil standards are concerned this site http://ukla-vls.org.uk/ gives a bit of an idea who has sold substandard oils in the past and has lots of info...

I agree it is not worth causing any detriment for the sake of a few days especially after 3 years. The Benn act ask was for Jan, some people want a another referendum which will be around 6 months and I suspect the EU will offer until 30th Nov now that they have delayed their new commission...

My understanding is what I posted up that I had read last Thursday was what would have been in the meaningful vote on Saturday had it not been pulled because the Letwin amendment was approved. Of course this is not the actual legislation. My delay concern is not so much the 3 days but the over 3...

https://gist.github.com/paulmaunders/71de56b42fa470399a832ebb60bd6240/revisions?diff=split For those interested, the above link I read last Thursday has the May deal on the left and the Bojo deal on the right. Red is removed from May's and Green added in Bojo's so you can see the differences...

I cut and pasted the Autotrader link and Autotrader came up with an ad expired message. The ad date from Autotrader link appears to be 8th Sept the same as the facebook ad. Also the postcode of the Autotrader link (TW19 7HH) is Hannibal Road in Staines (actually Stanwell) not Feltham which the...

My hand primer gets well hard but it's a1999 & who knows whether it's been replaced at some time or not. Beau's knowledge on these vehicles is waaaay better than mine so learn from it as I do. The only other thing I could think of is an immobiliser fault but I'm not sure if yours would have one...

Agree with chapel break if it's repairable. An insurers told me insurers often write off automatically any vehicle over a certain age (often 10 years) because of the economics of sourcing rarer parts, long delays and cost of hire vehicles and admin whereas it is far easier to make a low used...

Wouldn't let the slope bother you. Liquid will run downwards regardless of the slope without a vacuum and the tank is as far as it will go. The real cause is where the problem is. If it's a blocked pick up filter it may not make much difference. If it is a hole or leak then air will still get in...

No resistance does suggest a fuel line leak being a high probability with the pipes from the tank corroding being quite likely or blocked tank pick up filter as earlier posters have suggested but others owners have had issues with porosity of the filter head too although this seems much less common.

Did you try the hand priming by repeatedly pressing the button on the fuel filter housing until hard like one of the other members suggested?

Sorry for the delay or if the pic is a bit big. That's what my cables look like at the engine end. I reckon that there is enough slack that the if you press the box inner cable in the centre of the span between the adjuster then there is about 2 to 3 mm deflection before it feels like there is...

OK this this the best I can find at the moment. It is the A340E manual for Supras which is basically our box but without the transfer case. They refer to the cables as "accelerator" connected to the pedal & "throttle" connected to the box. Page 19 shows the adjustment of the throttle for the box...

I thought you meant the kickdown. The box end is not adjustable but only the engine end. I think I have a doc kicking about somewhere on my laptop. It may even be in manuals linked on this site. I'll take any pics I can legally get at.

My wife has a Daihatsu Auto & her ATF was a bit black at just under 100k miles. I periodically drained and flushed and around 15000 miles later it still works great. Hopefully your box is OK. I just mention it as I wouldn't want anyone else to have the issue I had if it was preventable. I will...