Search results

Im intrigued by what people think 80's are worth and going to be worth.... I have have been offered 18k for mine 6 months ago and two weekends i was offered 20k off another person, i am starting to think these silly offers may eventually stop but why would they.... How many 80 series in this...

Westcoast4x4 sell unichips

You might be right though some of it might be. There is a thread on ih8mud about parts that are interchangeable.:D

Pre 93 is cable driven.

https://partsouq.com/en/search/all?q=83110+60321 I get all my parts from partsouq or Amayama. Its not in stock at the moment with them so you would have to try amayama. But this is the Kmh unit, the mph one has been discontinued what you could do is order that and then put the face off your...

So far so good its reading as it should as I have run a GPS next to it counting as well.

My OCD wouldnt let me do that unfortunately. I found a good thread on the ih8mud forum about doing and its relatively easy just a delicate job.

Has anyone fitted new odometer to a 93 and onwards 80? I have a brand new unit and I want the correct millage to be shown not zero. Any advice on how to roll it over would be great.

Bit more of an update, this last month i have moved onto the engine giving it a good over haul and its running like a dream. Head has been cleaned up Cylinders have been honed Valves re cut and new oil seals New head gasket Timing belt and tensioner Ac belt Piston rings Big end bearings...

i went on a camping trip with her a couple of months ago and that is a proper rig. I have never really been a fan of them but it is very well equipped and in all honesty its bloody cheap for what it is. No expense has been spared on anything and everything is on it for a specif reason its also...

9091302094 Valve stem seals x12 Original Toyota part still in packaging Suitable for lots of different Toyota engines. 12x available (enough for 1hdt/1hz)

13204 17011 (.25 oversize) Conrod Bearings Suitable for 1hdt / 1hz Original Toyota Item Still in packaging. £120 ono.

Yep those 3 way cube connectors are a nightmare

8 bolts holding it down, going into t-nuts in the buffalo board, So its very easy to remove.

Haha no i found someone online who does them to what ever size you need, there an amazing finish they are done with a laser cutter. Some of my joiner friends had said they wouldnt be able to get anywhere near a finish like that.

Thanks, I used a company called Partonfabrication in birmingham, they can have it pre cut for you. The actual profling is cheap its all the fittings that cost the most, i remeber seeing what your on about im sure they sell it.

Cheers yes i can give you a rough idea of what you need but you obviously may need them bigger or smaller or shallower etc. I worked it all out on paper, got my brother to put it through CAD to make sure all my measurements where correct and ordered it all cut to length.

Thought i would share my draw setup i have been building through out lockdown been a bit of tedious task trying to get hold of certain things and alot of trial and error but i am very happy with the final result. The frame is made out of Bosch strut profiling with heavy duty slides and birch...

thanks for this Yes i have oem head bolts and washers in my order all ready do not worry doing all new oem engine gasket kit as well and new valve cover bolts and washers + timing belt and and all pulleys and gears.

have the head skimmed and fit a number5? thanks

i have found the notches, I am on 3x didn't realise they where so visible. thanks

Head has never been off as far as i know, its only done 140k but i have been getting a little bit oil in the rad but i have done a manual swap so it does have the auto rad on it and its loosing pressure ever so slightly so i think its sucking oil out of the cooler (which i believe is the...

Hi guys Just making a shopping list of parts to go through my 1hdt with and i will be doing the headgasket but there seems to be 3x thickness or notches, does anyone know which one i should be putting on it or anyway to find out. Cheers

Cheers front bumper is made by N4, i was thinking 35's more for looks more than anything it would of just finished it off. it drives very well on the 285's but It used to be an auto and i have put a manual in it so i am running auto diff ratios so it pulls extremely hard down low and has lost...

ohhh you have rear quarter wits end panel... i have been thinking about one of these for a compressor mount and a few electrical bits, how much did it cost you by the time it got here if you don't mind me asking ?

285's and a 4" lift, wish i had gone for 35's though.