A few surplus 40 series parts

[Rodger]

This may appear twice - done it, created thread and... nothing.

2 x packs of 8 black graphite impregnated poly bushes ID 5/8" OD 1" (fit 1958-80)
2 x packs of 4 black graphite impregnated poly bushes ID 15 mm OD 1" (fit 1958-80)
1 pair of 40 series greaseable 'extreme' shackles +3". 3/8ths steel, tube gusset, zinc plated (they need a pair of drilled 5/8ths bolts to finish [I used them!]).

1 x hood rest pad
BJ40 (3B) Top rad hose
BJ40 (3B) bottom rad hose
I also have the ali half doors complete with all the necessary fittings - paddle handles (S/S), hinge pins and bushing kit, striker plates and door pockets with drink holder, to fit 1963-80

All the above are new.
2nd hand bits:

I pair UK legal headlights
I pair of taillights (l got them off a scrapper - lenses & wiring connectors ok - cases are rotted through in a couple of places)


Any parts that are sold we'll post (you pay postage) when we get to the UK, or we'll meet, whichever is more convenient for both parties.
Payment can be by bank transfer or Paypal.
If you are interested in any of the parts, please pm me.
Please note, due to previous experiences, parts will not be sent until we are paid in full.

 

[Rodger]

In all the excitement I forgot to list a new brake master cylinder - the one reservoir type so it's for a post 1980 40 series. Never been fitted.
I also have the remains (because I removed the rev counter) of a 60 series dash pod - the right hand cluster of instruments is undisturbed.

Cheers

 

[tonytoyota]

Hi Rodger it'sTony wot is the cost of the doors and headlight r you and the goodlady ok i am lnterested and would like them let'see all the nest thanks a lot from Tony.

 

[Rodger]

Hi Tony, I'll take and post more photos tomorrow.
We are both fine and enjoying retirement.
There are photos of the doors and their parts on the thread in 40 series section.

Cheers

 

[JonFJ1969]

Hi Roger, can you let me know costs for the 3B top and bottom hoses, cheers Jon

 

[Rodger]

Below are the photos, info and the price:

Aluminium half doors complete with all the necessary fittings - paddle handles (S/S), hinge pins and bushing kit, striker plates and door pockets with drink holder, to fit 1963-80: Anything over £200
At today's prices these would be nearly $600 before they have left California




The headlights (RHD dip left) passed last UK MoT but one reflector plate is a bit rough. £12.50 each. I have the boxes that my LHD headlights came in so could be reasonably safely posted, if needed.




Hoses: I have just noticed that one of them says it's for a 3B T. £15.00 for the pair.


Thanks for the enquiries. I'll post more photos etc., later
Regards,

 

[Rodger]

2 x packs of 8 black graphite impregnated poly bushes ID 5/8" OD 1" (fit 1958-80). £12.00 per pack.



2 x packs of 4 black graphite impregnated poly bushes ID 15 mm OD 1" (fit 1958-80).£6.00 per pack.



1 x hood rest pad, ideal if you have a hardtop but want rest the bonnet against for servicing. £3.00



1 x new brake master cylinder - the one reservoir type so it's for a post 1980 40 series. Never been fitted.



Regards,