Chris Green90
Well-Known Member
Finally got round to fitting the winch mount Gary (J66P) made for me.
It's Spectactular and I am really pleased with how it looks
First off strip out bull bars, grill and bumper
The end of the chassis rails have to be removed, 12mm Socked with extension through the hole in the front, Then the existing recovery eyes need to be removed, 17mm socket, Had to use the big wheel brace socket and plenty of free up to get these out.
The bottom of the plate on the end of the chassis rail has to be ground away to leave it flush with the rail.
Mount the plate using the existing recovery point mountings and bolts
Install winch and trim bumper to fit.
I just removed the whole bottom portion of the bumper as the bull bars hide everything really well
It's Spectactular and I am really pleased with how it looks
First off strip out bull bars, grill and bumper
The end of the chassis rails have to be removed, 12mm Socked with extension through the hole in the front, Then the existing recovery eyes need to be removed, 17mm socket, Had to use the big wheel brace socket and plenty of free up to get these out.
The bottom of the plate on the end of the chassis rail has to be ground away to leave it flush with the rail.
Mount the plate using the existing recovery point mountings and bolts
Install winch and trim bumper to fit.
I just removed the whole bottom portion of the bumper as the bull bars hide everything really well