Bhutan
Active Member
- Joined
- Apr 3, 2016
- Messages
- 95
- Country Flag
As TonyP says, if your electronic insides still work fine Tractionman, this is real, real simple.
Buy a new blank case/key from ebay as you have done, get the blank key cut to match your old one, put your electronic insides into the case, done!
Cost you next to nothing. No reprogramming, easy!!
My casing cracked and the key wobbled in the casing every time I started the vehicle. I lived with it for a little while, then thought if I carried on I was probably going to damage the electronics - the expensive part. I bought a blank like in the link below (thanks TonyP for the link,) did the neccessary for next to nothing, and 2 years later like TonyP, mine still works a treat.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/161705600394
Good luck!
Buy a new blank case/key from ebay as you have done, get the blank key cut to match your old one, put your electronic insides into the case, done!
Cost you next to nothing. No reprogramming, easy!!
My casing cracked and the key wobbled in the casing every time I started the vehicle. I lived with it for a little while, then thought if I carried on I was probably going to damage the electronics - the expensive part. I bought a blank like in the link below (thanks TonyP for the link,) did the neccessary for next to nothing, and 2 years later like TonyP, mine still works a treat.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/161705600394
Good luck!