Land Cruiser j150 + Hard-wiring for Dashcam

[MaddChris]

Hope this is the correct place to post this, first time user
Bought the same hard wire kit for the Land Cruiser as I did my MK5 golf and while it woks perfectly in the latter, I'm having no luck with the Cruiser.

Kit: https://www.amazon.co.uk/gp/product/...?ie=UTF8&psc=1

I was first just trying to get the ACC connected but the camera wasn't getting any power from the fuses I tried.
- ACC
- P/OUTLET
- Washer

Obviously had the ignition turned on when testing the power up.
Any help or pointers would be greatly appreciated.

 

[DH.120]

P/outlet should definitely come “live”. Are you sure you had a good earth when checking the voltages?

 

[MaddChris]

Only one I had connected was acc.
Didn't have ground or constant power connected yet.
I thought it might boot up just on acc to check it was working.

What's best for constant power?

 

[DH.120]

Might be me still being tired, but I’m confused by your reply, but how were you wiring from the fuse? One of the easiest way is to use a piggy back connector like This The ground wire of the dash cam has to go to ground not one side of the fuse. Sorry if I’ve misunderstood and am teaching you to suck eggs.