...and more progress the last couple days
..I can see why the outback drawers cost £1500 now!
so I added some corner protector aluminium section to the drawer top
and the fridge slide section - and last night prayed that there will be more than 48cm space between top of fridge slide and the canopy back hatch lip!
started on the runners for the fridge slide
aluminium angle attached to 1" box with rivnuts
close-up of the box section that runs between the bearings
fridge slide pulled out
finished bolting fridge slide together
and added "stopper" bolts to stop it pulling all the way out
closed fridge slide after i cut a slot in it to aid pulling it out and the space in front of the drawer system
now to make the main storage drawer - 28cm deep and 1.2m long
runner 1x3" box section attached (rivnuts inserted in the box)
and the smaller drawer under the fridge slide
Next I need to attach the runner box section to the right drawer
and then add edge protection strip and also L-section aluminium to form bracing internally in the drawers
will also fit horizontal guide bearings for main drawers
and more board on drawer faces, and the gaps at sides of drawers to neaten up the finish, and drawer handles and catches!