warrenpfo
Well-Known Member
- Joined
- Jul 21, 2010
- Messages
- 2,895
I want to make one of these and wondered if it could be made out of mild steel and would it be best to atack it with an angle gringer or bench grinder?
It is machined from 1018 steel producing a 25,000 Lb. Safe Working Load with a 1.5 safety Factor. The hitch is Nickel Plated for a high quality durable finish.
To be locked in place by:
Specifications:
LIFETIME WARRANTY
Patented dual lock log design offers over 5,800 pounds of head pull strength
Tested specifications exceeds 40,000 pounds
No internal springs to seize up or break
Premium 100% stainless steel
Knurling on lock heads adds style and grip and is machined from 100% solid stainless steel
Double headed or dog bone style design
Width between heads (exposed pin length or gap space) is 3 1/2"
It is machined from 1018 steel producing a 25,000 Lb. Safe Working Load with a 1.5 safety Factor. The hitch is Nickel Plated for a high quality durable finish.
To be locked in place by:
Specifications:
LIFETIME WARRANTY
Patented dual lock log design offers over 5,800 pounds of head pull strength
Tested specifications exceeds 40,000 pounds
No internal springs to seize up or break
Premium 100% stainless steel
Knurling on lock heads adds style and grip and is machined from 100% solid stainless steel
Double headed or dog bone style design
Width between heads (exposed pin length or gap space) is 3 1/2"