SteveS
Well-Known Member
- Joined
- Jan 12, 2013
- Messages
- 630
The clutch on my Zeon 10s is not engaging - constantly on freespool. The clutch on these is remote/electric. I can hear various solenoids clunking as I switch direction, engage/disengage clutch etc using the WiFi controller. The motor is spinning. Does anyone have the logic diagram or circuit for this unit. I’m particularly interested in the voltage/circuit around the 4 pin flying lead that connects to the clutch pack from the solenoid pack. Thanks in advance. I can’t find any useful information on the web despite extensive searches