Wiring connectors

[felix2566]

Hi All,

I need to replace the wiring to my rear rear diff locker on my 80 series as its corroded and snapped.

The connector looks like the picture below and I beleive this is the part number for the housing. 90980- 11250

Can any one tell me the part numbers for the pins and seals?

I can buy ready made ones from the states, but I cant beleive it's not possible to buy them in the UK.

Thanks

 

[AndycruiserguyLomas]

That looks like the plug for the indicator switch to tell you the diff lock is actuated. AFAIA the diff lock plug has 5 wires to it.

 

[felix2566]

Sorry, yes your totally right. It is that plug that I'm after though

 

[chapel gate]

Toyota sell the pins as "pig tails". A pin with about 3" of wire so you can splice into your loom.
Most of the connectors seem to still be available.

 

[felix2566]

I've not been able to find wire repair stuff in any of the parts catalogues, do you know where I can find the info?

 

[flint]

Might be handy:

https://www.toyota-tech.eu/wire_harness_rm/RM06H0E.pdf

 

[felix2566]

@flint looks exactly like what I was after. Even explaining how to remove the pins, super frustrating, knowing there is a method, but not being able to work it out.