Looking for some-one who is breaking a 1992 LJ78 import (or there-abouts) that has really good door cards for sale. The cards are grey trim with a grey suede inner panel.
With thanks.
Stephen Diarmid
Hi Ben,
Wanted to check out how the connectors behind it work and the possibility of connecting from there for the light illumination relay wiring loom I have made up. Thanks.
Has anyone got a photo of the wiring side of this fuse box they can post & any experience working on it ?
It is the unit located under the RHS driver's kickboard.
With thanks.
Stephen
Conclusion
A replacement five pin relay 85942-60010 was installed and enabled the pump circuit to wash on the headlamp beam when pressed. Job done.
The reason the fluid tank was always empty and draining onto the street when filling was a faulty one way valve 85031-30020. This is situated near...
I have managed to check the LJ70 wiring diagram for the light reminder relay, pins connect as follows:-
Black & White - From "Diode" for interior light (8 - 1) / To "Door" courtesy SW LH (8 - 1)
Green & Orange - From "Tail" Fuse (4 - 3)
Grey - From "CIG" Fuse (9 - 2)
Black & Yellow - From...
I have found a used light reminder relay from a GB LJ70 C/W with the connector & + 30cm of the original wiring loom & would like to patch it into my JP LJ78 (Auto) wiring.
As previously mentioned the Japanese LJ78 (Auto) does not have a light reminder relay but a reverse gear reminder relay in...
Thanks spotlight for your help.
There are two valves on the headlamp washer hoses (Part no: 85031-30020) which have directional arrows embossed on them. Can you tell me which way they point to, the pump or nozzle?
I have a feeling one of them may be in the wrong direction as fluid pours out of...
On further investigate the 85276-22070 part number given from an LJ70 does not seem to be the correct one for the LJ78.
The LJ78 part is 85276-22060 which now superceeds to 85942-60010 at a cost of £126 ex vat from Toyota.
Both vehicle have identical shape relays with the same connecting plug...
Got around to cutting out the immobiliser box this morning in the pouring rain and found it a relatively simple exercise of cutting the immobiliser wiring off the main ignition wiring loom and bridging the wiring back with some self crimp terminals. Job done.
Thanks for your posting grantw...
My vehicle has a coded key fob with two metal contacts that have to be connected to the female part on the steering column every time on start-up.
The one coded key packed in this morning for some reason and I am now using the last spare key fob.
I would be inclined to cut this whole unit out...
I have established that the motor runs by connecting a power source direct to the motor power coupling and sprays.
The problem is the power feed into the motor as there is none when the headlamp lights are on & the washer button on the wipe stalk is depressed.
The main screen washer works...
Looking for decent Turbo emblem as above for my vehicle.
Tried to get new one from Toyota but the part is "no longer available" (usual story).
Regards,
Stephen
07885971268
Thanks for all your help. With your comment/s and the original Japanese language handbook I was able to figure it out.
It would seem that the pump motor has seized up, a topic that has come up a few times on Landcruiser forums.
Regards.
Can a reader kindly enlighten me how the front headlamp washers are activated on a 1992 Japanese Prado EX J78 import (Similar to LJ70)? Cannot see switches anywhere on the dash for this at all.......:icon-question::icon-question::text-thankyouyello:
This is the metal air cleaner feed pipe that run across the top of the engine with the large EFI sticker on it. Mine has been hammered.
Either from a scrap Surf or Prado 2.4 turbo diesel import.
Looking for a very clean V.G.C. one of these, especially free from damage.
With thanks.
Stephen...
Illuminating Warning Relay Cabling Origin
I have checked my auto LJ78 in the area as indicated in Ben's photos and found a different relay. It has a three pin female block connector cable & seems to be for the "reverse gear warning".
There appears to be a slight difference in the main dash...
Can a forum member kindly advise me exactly where the light reminder relay is located on the UK LJ70 series?
I have the imported LJ78 version from Japan which does not have this function and I want to visually check my wiring loom to see if it has the capacity for one.
With thanks.
Stephen
Thanks Pete for the info.
The original unit was pulled out & a Sony single Din installed bypassing the factory amp. Though, unfortunately the person that did this cut the 14 pin block connector off the factory loom & left me a mess to tidy up.
Hi,
Has any forum member got for sale the original radio/cassette part number 86120-95J04 from this vehicle that will fit straight into my three connector (1 x 6, 1 x 10 & 1 x 14 Pin) audio harness?
Or alternatively has anyone had any experience with adaptors & fitting an after-market headset...
Can anyone advise how to change a snapped front wheel stud on a 1992 Prado L78 Landcruiser import?
I have been to the local garage with this problem & they say that it is too complicated for them & that they need special Toyota tools?
With thanks.
Stephen Diarmid
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.