hzj75

Recently purchased an old beat up 75 series troopy. For the most part, it seems decent just well used. I don't have much background with working on trucks so I assumed the pretty basic build of these trucks will allow me to learn and actually accomplish something. So we will see. I attached...

Hi Guys So I'm new to this site and was hoping someone would be able to help me with an issue on my 75 series. Recently my rear axle sheared off its hub studs and in the process key holed out the stud holes, so Ive got an aftermarket hub as a replacement. The problem is I can't source any wheel...

Hello hello I have this old TJM bar with openings for lights and was wondering if I could custom fit some strong LED bars for the fog instead of the blinkers. Any recommendations or hints?

Hi all, I have a BJ70 with disc fronts and drum rears on leaf suspension and am wondering if axles from a more recent HZJ75 Troopy with leaf springs and disc brakes all round will bolt straight up? Interested in the disc brakes and rear ff axle. Are the front discs larger too? Cheers Chris

Hi All, I have a persistent oil leak which is coming from the front of the gearbox on my 1990 HZJ75 Troop Carrier, H55F gearbox. I've now pulled the gearbox 4 times to try and find the source of the leak and fix it. the leak is showing up at the bottom of the bell housing. So far I have...

Hi everyone, I recently bought a Landcruiser HZJ75 4.2D. However, the car had a terrible accident and the right side needs some new bodyworkparts. Anyone know any good solutions, or people/companies who sells second hand bodyworkparts for a good price. I live in Belgium, and I'm willing to...

I am thinking about changing my HZJ75 seats to two single buckets and was wondering if anyone had any suggestions as to the best ones to use that need the minimum mods to fit them... I have heard that it is possible to use Subaru Liberty or even Mazda buckets... Has anyone else heard or done...

I would like to fit a turbo to my 1996 HZJ75 but I have been told that the bottom end bearings will need to be replaced if I do. It is 18 years old but it only has 186k on the clock. After some serious advice. I am in Brisbane Queensland Australia so if someone else is in the area and has a go...

Hey Guys, First off, I live in Victoria, Australia, I'm new to Land Cruiser's but have been wanting a decent 4x4 plus something that I can tow with for a while, so I apologise in advance for my newbie questions. I've been offered a 1998 Land Cruiser 75 Series with an aluminium tray for $5000...

hi, I am considering upgrading my HZJ-75 with the 1HZ 4.2D engine with a turbo. Can you share your experience with this type of conversion? Is it worth it at all? Other questions: Is it possible/recommended on a 1HZ engine with 265.000 km or is it better to replace it? Anything I should be...