After many searches I think I have confused myself in completing this. Just to check the idiots guide is
1. Write down every change I do so I can attempt to reverse if it all goes Pete Tong
2. Take off 4 allen bolts at the top lift lid slightly and turn the toothed wheel approx 6 turns clockwise and tighten lid back up again.
3. Loosen the nut on top off pump in middle of the 4 allen key bolts and turn screw to point where I feel least resistance and tighten nut back up again.
4. Remove sleeve and crack off the 12mm nut on the bottom right of the OUT bolt ( be careful not to turn screw when loosening the nut) and turn the screw 1/8th of a turn and nip nut back up again.
Q. In step 3 does the screw get turned clockwise or anti-clockwise and same goes for step 4 which way do I turn the main pump screw?
1. Write down every change I do so I can attempt to reverse if it all goes Pete Tong
2. Take off 4 allen bolts at the top lift lid slightly and turn the toothed wheel approx 6 turns clockwise and tighten lid back up again.
3. Loosen the nut on top off pump in middle of the 4 allen key bolts and turn screw to point where I feel least resistance and tighten nut back up again.
4. Remove sleeve and crack off the 12mm nut on the bottom right of the OUT bolt ( be careful not to turn screw when loosening the nut) and turn the screw 1/8th of a turn and nip nut back up again.
Q. In step 3 does the screw get turned clockwise or anti-clockwise and same goes for step 4 which way do I turn the main pump screw?