Alrightchief
Active Member
- Joined
- May 5, 2018
- Messages
- 98
So I thought of putting the uprated 485mm rear springs on the LC
Now with tech-stream the rear AHC is reading within spec for pressures etc so my springs are fine, This makes me to think I should leave alone, but will it keep the AHC in good condition if I take some of the strain off it with uprated springs?
Theres no way of telling if my springs are 455 or 485 without taking them off and measuring them because Iv always wax oiled
What you guys think?
Now with tech-stream the rear AHC is reading within spec for pressures etc so my springs are fine, This makes me to think I should leave alone, but will it keep the AHC in good condition if I take some of the strain off it with uprated springs?
Theres no way of telling if my springs are 455 or 485 without taking them off and measuring them because Iv always wax oiled
What you guys think?
Last edited: