Hi all
I am working on a FJ45 and have a problem with
the wiper linkage. On the nearside (its a right hand drive)
the spindle that the wiper arm mounts to, spins freely in the tube
that mounts to the scuttle. On the offside the spindle seems to be siezed
to the outer tube, still after a tin of plus gas, The wiper will only move across the screen
if the nut holding the outer tube to the scuttle is very loose.
So that both tubes and mounting nut move.
Has anyone got any tips or advice as to how to get the wipers working.
Thanks, I hope you've worked out what I am trying to say.
John
I am working on a FJ45 and have a problem with
the wiper linkage. On the nearside (its a right hand drive)
the spindle that the wiper arm mounts to, spins freely in the tube
that mounts to the scuttle. On the offside the spindle seems to be siezed
to the outer tube, still after a tin of plus gas, The wiper will only move across the screen
if the nut holding the outer tube to the scuttle is very loose.
So that both tubes and mounting nut move.
Has anyone got any tips or advice as to how to get the wipers working.
Thanks, I hope you've worked out what I am trying to say.
John