HJ47 N/S/R Indicator not working.
I have checked the bulb, checked the earth continuity
when I checked the muti plug on the supply to the lamp I keep getting different readings.
(no not off on!) it would range from an occasional 12v to a regular 3 or 4v then up around 9v.
I chased it through to a muliplug at the front and checked the supply side and got the same results.
I have found the flasher unit which has 2 wires going into it.
The indicator does not work on hazard, all the others work fine.
It has been working but it knows its MOT time!
Any suggestions? I have reached the end of my electrial knowledge.
Thanks
John
I have checked the bulb, checked the earth continuity
when I checked the muti plug on the supply to the lamp I keep getting different readings.
(no not off on!) it would range from an occasional 12v to a regular 3 or 4v then up around 9v.
I chased it through to a muliplug at the front and checked the supply side and got the same results.
I have found the flasher unit which has 2 wires going into it.
The indicator does not work on hazard, all the others work fine.
It has been working but it knows its MOT time!
Any suggestions? I have reached the end of my electrial knowledge.
Thanks
John