Some updates for following seasson

[bobo2]

Do some of you know where 4wd dash green light is conected.My four wheel is operated normaly but indicator green light stop to work. I checked bulb is ok. Do somewhere on the gear box have some sensor only for that light?

 

[yota_lj]

If you read my topic I have had same issue,

I changed the switch and light now is full working!

If you would check before buy the new switch, disconnect the switch e close the contact, if light is ok, you will see it on the dash!

 

[bobo2]

If you read my topic I have had same issue,

I changed the switch and light now is full working!

View attachment 133574
View attachment 133575

View attachment 133576

If you would check before buy the new switch, disconnect the switch e close the contact, if light is ok, you will see it on the dash!

Yes I read your topic as well,but I was thinking "reverse light switch" is for white light on tail lamp.
Excelent! Can you tell me position of the switch? I saw on the gear boxt three switches.
Thank You again!

 

[yota_lj]

OEM 4wd switch was impossible to find out!
I found this, the only one problem was the wiring a little bit short, but something really easy to solve!

The switch is here, on the right side of tranfert

 

[bobo2]

OEM 4wd switch was impossible to find out!
I found this, the only one problem was the wiring a little bit short, but something really easy to solve!

The switch is here, on the right side of tranfert

View attachment 133589

Ok its on the transfer case,today I will check
You help me with this too much

 

[bobo2]

 

[bobo2]

Fixed

 

[bobo2]

Thanks to Yota I found sensor and conected wires but light still not caming, I folowed wires and find out that problem was in bad conecting on this conector

 

[bobo2]

Almost fell on the roof,the field fell below and two wheels stay in the air. Diferentials on the ground were held to truck not going down

 

[StarCruiser]

Almost fell on the roof,the field fell below and two wheels stay in the air. Diferentials on the ground were held to truck not going downView attachment 133725

Ooops! That looks tricky! No harm done hopefully?

 

[bobo2]

Ooops! That looks tricky! No harm done hopefully?

Fortunately we raise up the truck undamaged

 

[StarCruiser]

Glad to hear it.

 

[bobo2]

 

[bobo2]

The beast is finaly inside!!!!

 

[yota_lj]

Wow!!! You find a 1kzt? or a 1kzt-e?

I'm really gelous! !!

 

[Iwan]

Well done mate!

Have you taken the butterfly flap out from the inlet manifold.. it looks like was originally a 90 series te motor.. good choice!!

 

[bobo2]

Wow!!! You find a 1kzt? or a 1kzt-e?

I'm really gelous! !!

Its 1KZT from 4runner
only instalation cable from alternator more,and going have a fun

 

[bobo2]

Well done mate!

Have you taken the butterfly flap out from the inlet manifold.. it looks like was originally a 90 series te motor.. good choice!!

its 1KZT from 4runner mate,from 2001. only 150 000km.flap remain inside

 

[bobo2]

 

[bobo2]