Just looking for some advice on suction control valve removal. Everywhere i looked advises to remove the two bolts remove the valve and replace. Have removed the 2 bolts and valve is now loose but cannot get enough of a grip to pull off. Started with fingers, moved to pliers ,grips etc but without success. Before i do anything stupid can anyone share how they overcame this problem. Bought the vehicle a few months ago so using furlough to do all the maintenance that may or not have been done in the past and this was part of the preventative maintenance as original short version was still in place. All other jobs have been relatively painless but scratching my head a bit with this issue.