Wheel nut

[Aeroelastic]

Fellow 80s,

Quick question, I am picking up a set of 80 alloys for my 90 series. The zoomed in photo below shows the wheel seat for the nut:

Which wheel nut fits the above? The flanged one or the coned one? I know there are 2 types of 80s alloys.

View attachment 340342

Thanks.

 

[AndycruiserguyLomas]

The lower one. 12V 80's have the cone type, 24V the spigot type same as a Colorado. It looks like the ones you have got are 12V ones.

80 wheels are a good choice for the Collie, I has them on mine with 275/70's with a 2" lift. This gave me no rubbing issues. On my present Collie ( V6) I have 275's on some after market wheels with a different offset and they don't rub with standard suspension ( just).

 

[Aeroelastic]

Thanks. 2 beautiful 90s. The black one is just so tidy!!!! Wins the collies beauty contest anyday. I reckon it will be the coned nut too. But haven't own any 80s wheel before so want to confirm.

 

[AndycruiserguyLomas]

The black one is just so tidy!!!!

Yep it was quite something. With a chip it was rapid to go with the looks. Put Pedders 2" lift on it as the rear springs were tired but it ruined the ride and was ultimately the reason I sold it and got the 120.

Am running Yokohama Geolanders GO15's on the silver Collie now and on my Hilux which I am pretty impressed with.