hello to everyone, i'm new to here and land cruisers.
can any one tell me, will 285/75/16 tyres, on 8x16 aloys et 0
fit on an 80 running stock suspension.
would also like to fit 30mm spacers,
however all i see available are non hubcentric spacers.
i've built many Drift Cars and run spacers, but always hubcentric,
allways been told how wheel studs just hold the wheel to the hub, the hub(spigot) takes the downward load, ie minimum shear loading on the spacer stud.
all the spacer i've seen have the full downward loading, so the studs are taking the full down ward shear force.
has anyone had any problems running this style of spacer??
cheers john
can any one tell me, will 285/75/16 tyres, on 8x16 aloys et 0
fit on an 80 running stock suspension.
would also like to fit 30mm spacers,
however all i see available are non hubcentric spacers.
i've built many Drift Cars and run spacers, but always hubcentric,
allways been told how wheel studs just hold the wheel to the hub, the hub(spigot) takes the downward load, ie minimum shear loading on the spacer stud.
all the spacer i've seen have the full downward loading, so the studs are taking the full down ward shear force.
has anyone had any problems running this style of spacer??
cheers john