Batteries under the bonnet and CTEK in the boot.

[cmcmill01]

ohhh you have rear quarter wits end panel... i have been thinking about one of these for a compressor mount and a few electrical bits, how much did it cost you by the time it got here if you don't mind me asking ?

Think it was about $100 shipping on top, but the usd to GBP exchange helped at the time, plus import tax.

 

[steverjuk]

I've done something very similar, but I've also added a twin arb air compressor under the aluminium panel.

 

[cmcmill01]

I've done something very similar, but I've also added a twin arb air compressor under the aluminium panel. View attachment 165346

Very good, do you have solar and AC coming in? How do you get the feeds into the truck? I’m thinking maybe one of those AC inlets like motorhomes have!!

 

[steverjuk]

I've got a 5 pin bulkhead connector SP21 Bulkhead IP68 Waterproof Plug and Socket Connector 250V Multipole | eBay - [Leaving Land Cruiser Club], the female part I've punched a hole through the roof and tiger sealer in. From that I run two wires to my solar panels and have three spare that I can use for AC or something else.

The furthest right circuitry brake is for my solar panels.

 

[cmcmill01]

All in, and the T-Max compressor fits in below, happy days.

 

[cmcmill01]

So fitted the Marine index gland thing, and routed the first wire, plan to get a 6-way switch panel to remove all the relays etc and the will reroute the other wire.