Paul
Well-Known Member
As I have been out of the loop for a while, I thought I would ask a couple of questions as I go through my 80.
I have searched quite a bit on here and have found lots of useful info for doing the work but the main things are obtaining the actual parts.
1. I am going to install a separate trans cooler, but are there any recommendations for a good unit to put in?
2. EGR removal blanking plates supplier, thought I had got away with this as its an import but the valves are there.
3. The big one, going to rebuild the front axle hubs and wheel bearings. When I search there are so many suppliers, but is anyone doing a complete kit that would be recommended as I know last time you could buy complete kits but then order bearings from somewhere else as they were better for example.
I have searched quite a bit on here and have found lots of useful info for doing the work but the main things are obtaining the actual parts.
1. I am going to install a separate trans cooler, but are there any recommendations for a good unit to put in?
2. EGR removal blanking plates supplier, thought I had got away with this as its an import but the valves are there.
3. The big one, going to rebuild the front axle hubs and wheel bearings. When I search there are so many suppliers, but is anyone doing a complete kit that would be recommended as I know last time you could buy complete kits but then order bearings from somewhere else as they were better for example.