No play to speak of really. Now iv got the bottom grease nipple in, Just keep em topped up with grease, Those pins and bushes are bloody hard steel, I broke two Taps trying to put the thread in for the nipple, So i ended up welding it in, There was slight flexing in the Box section where the wheel holder sits, So i doubled up the clapping plate to 10mm thick, It seems to have sorted it, Once i get the Toggle clamps fitted, Im expecting Zero movement... Fingers crossed!.. A pin and bush kit was around £60 for a mini digger,... Im thinking of going up to a 3ton digger kit where the pin is a tad longer and a bit thicker for when i do the 24V..